CIDAN RAPIDO SSM electrical guillotine shear
CIDAN RAPIDO SSM (Stacking Sensitive Material) is our cut n’ stack system that speeds up your guillotine shear and never leaves you with scratches or dog-ears.
Set backgauge measurements and number of cuts. The sheet support is pulled back fast as lightening and the cut material falls gently down onto the moveable material wagon (option) where the sheets are stacked at a speed of up to 24 panels per minute. The material wagon can be loaded with up to 700 kg. In combination with the CutLink control system you have a real cutting and stacking giant that can be programmed for different backgauge settings in the desired quantities, all with neat stacking on the material wagon. There is no smarter, gentler or more efficient backgauge system for high volumes.
Key advantages
Quick and gentle stacking of all size of sheets
Ergonomic – removing of every single cut piece out of the machine not needed anymore
No scratches or dog-ears – especially in soft and sensitive materials.
Capacity
CIDAN RAPIDO SSM, perfect when cutting larger sheets or sensitive material.
Working length
3200 – 4100
Cuts per minute
24
Steel thickness (400 N/mm2)
2,5 – 1,5
CutLink control system
RAPIDO SSM comes standard with a CutLink control system that controls following:
- 1000 mm motorized backgauge, in single or program mode.
- SSM sheet support
- Parts counter
- Cutting mode – single cut or continuous cut
- Pneumatic controlled hold down beam
1000 mm
motorized backgauge
Backgauge
It facilitates material handling by controlling the position of both the sheet holder and the sheet support. CutLink can be used in both manual and automatic modes. RAPIDO SSM delivered as standard with 1000 mm backgauge.
Cutting speed:
125 mm – 24 cuts/min
750 mm – 15 cuts/min
0-100 mm – 35 cuts/min but without SSM-function
Pneumatic hold down beam
Pneumatic hold down beam, only 32 mm from cutting line for minimal waste. Advantage when cutting soft and sensitive materials. Hold down beam also serves as finger protection preventing fingers to reach the shear.
Sheet support SSM
SSM (Stacking Sensitive Material) is our cut n’ stack system that speeds up your electrical guillotine shear and never leaves you with scratches or dog-ears. The sheet support is pulled back fast as lightening and the cut material falls gently down onto the moveable material wagon (option) where the sheets are stacked at a speed of up to 24 panels per minute.
The rear side of the machine is covered with mechanical side fences and light guard, for easy access to the moveable SSM material wagon.
RAPIDO SSM table
RAPIDO SSM has milled grooves in the table every tenth millimeter and fixed angle stops with millimeter scales on both sides.
LED-illuminated cutting line
The hold down beam has an opening at the top, providing a clear view of the LED illuminated lower shear blades. This is very helpful when cutting along marked lines.
OPTION
Extendable table extension
OPTION
Material SSM wagon on wheels
OPTION
Squaring arm with T-groove
OPTION
Moveable material wagon (return to sender)
OPTION
Forced cooling
Forced cooling of the cutting motor for continuous high volume cutting
Discover the smart planning tool for sheet metal profiles
Efficient sheet metal processing begins and ends with nuEvolution from nuIT – the smart planning tool that revolutionizes your entire manufacturing process. Combine nuEvolution with the impressive power and agility of CIDAN’s machines for perfect oversight, great results, shorter lead times, and increased profitability. All you need is a tablet or laptop and your finger.
Technical specifications
| Model | RAPIDO SSM 32 | RAPIDO SSM 41 |
|---|---|---|
| Working length mm | 3200 | 4100 |
| Speed cuts/min | 24* | 24* |
| Weight kg | 2100 | 2500 |
| Steel1 | 2,5 mm | 1,5 mm |
| Stainless steel2 | 1,6 mm | 0,6 mm |
| Aluminum3 | 3,7 mm | 2,2 mm |
*when cutting 125 mm, 15 cuts/min when cutting 750 mm, 35 cuts/min when cutting 0-100 mm but without SSM-function
Support
We are always available for technical support and are happy to perform preventive and protective maintenance on your machines.
Get help choosing the right machine
Talk to one of our specialists and get answers to all your questions. Call +46 511 245 20 or contact us via email:
Trade in your old machine
We buy your old machine, regardless of brand and age, when you invest in a new one from us. Take the opportunity to invest in a more efficient future by upgrading to a new, smart, and fast machine. The fact that the new machines are also more environmentally friendly is an added bonus.
Spare parts
Do you need spare parts and accessories for your CIDAN, Forstner, or Thalmann machine? Take the opportunity to place your order to ensure your machines are always in top condition. Contact us via email, and we’ll take care of it for you.